| 939 | 1 | 214 |
| 下载次数 | 被引频次 | 阅读次数 |
城市化进程中,停车位紧张问题容易导致车辆乱停乱放行为的增加,进而影响市容市貌,传统的人工管理车库方式不仅效率低下,也容易存在安全隐患等问题。因此,为提高车辆管理的效率并满足车辆的及时存取需求,基于可编程逻辑控制器(PLC)设计一种智能体立体车库的控制系统。结果可知,在仿真实验中,当存取次数为20次时,存车优先比取车优先的耗时多200 s。改进前和改进后的系统随存取次数的增加,总耗时时长均呈正相关增加,改进前的系统总能耗相比于改进后的系统总能耗要多0.1 kWh。综上可知,所设计控制系统能够提高车辆的存取效率,且能耗较低,为解决车辆停放和管理问题提供了可靠的方案。
Abstract:In the process of urbanization, the shortage of parking space is easy to lead to the increase of disorderly parking behavior of vehicles, and then affect the appearance of the city. The traditional manual management of garage is not only inefficient, but also prone to security risks and other problems. Therefore, in order to improve the efficiency of vehicle management and meet the needs of timely vehicle access, an intelligent stereo garage control system based on programmable logic controller(PLC) is designed. The results show that in the simulation experiment, when the number of accesses is 20 times, the time of storing the car priority is 200 s longer than that of taking the car priority. The total time of the system before and after the improvement increases with the increase of access times, and the total energy consumption of the system before and after the improvement is 0.1 kWh higher than that of the system after the improvement. To sum up, the designed system can improve the access efficiency of vehicles, and the energy consumption is lower, which provides a reliable solution for solving the parking and management problems of vehicles.
[1] 孙剑萍,徐昀,李晓鹏,等.城市停车场路径规划系统设计与实现[J].现代电子技术,2021,44(21):83-89.
[2] 李臣华.智能立体停车库控制装置系统研究[J].微型电脑应用,2020,36(9):97-100.
[3] 丁述勇,张征,丁文洁,等.多巷道式立体车库优化设计与车辆存取策略研究[J].工程设计学报,2021,28(4):443-449.
[4] 房春瑶,贾克斌,刘鹏宇.基于监控视频的出租车违规私揽行为识别[J].计算机仿真,2020,37(5):326-331.
[5] 王丽杰,代敏,刘志强,等.立体车库智能测控中三闭环电机控制系统[J].电机与控制学报,2020,24(5):107-115.
[6] 曾鑫,唐樟春,卢军,等.基于PLC的升降横移车库系统设计研究与实现[J].自动化仪表,2022,43(9):23-29.
[7] 孙彦超,马幸坤.基于西门子PLC-1200立体停车库的研究与实现[J].自动化技术与应用,2021,40(5):92-94.
[8] 陶磊,武建涛,王力,等.垂直循环式立体车库控制系统的设计[J].起重运输机械,2020(17):55-58.
[9] 贺云鹏,李建国,张海飞.基于改进遗传算法的立体车库布局及配置优化[J].武汉大学学报(工学版),2020,53(5):464-470.
[10] 王良成,汪源,张永辉.PLC技术下新能源汽车电机驱动系统故障检测[J].机械设计与制造,2022,376(6):199-202.
[11] 梁艳阳,吴伟,姚超智,等.基于PLCopen标准的工业机器人运动控制器的设计与实现[J].现代制造工程,2021(12):35-40.
[12] 宋湘辉,周霖轩.基于HMI及PLC的抽水蓄能电站自动化值守联动系统设计[J].自动化技术与应用,2023,42(1):46-50.
[13] 朱红梅,潘美君.基于PLC和触摸屏的自动生产线控制系统的设计与应用[J].自动化技术与应用,2022,41(12):32-34.
[14] 张杨林子,王顺,叶枝森.工业设备基于物联网远程PLC控制系统设计[J].自动化技术与应用,2023,42(3):8-10.
[15] 李辉,王金刚,张小俊.一种改进的地下车库弱纹理下智能汽车即时定位与建图算法[J].科学技术与工程,2021,21(24):10369-10375.
[16] ROCHA D C,LAGE P L C.Modeling the Reactive Flow of Semi-continuous Mixtures by the Adaptive Characterization Method[J].Chemical Engineering Science,2023,267:118336.
[17] 房浩.基于PLC技术的自动化机电控制系统设计[J].现代电子技术,2021,44(6):24-27.
基本信息:
中图分类号:U491.71;TP273
引用信息:
[1]戴勇,靳海玉.智能立体车库的控制系统研究设计[J].微型电脑应用,2024,40(11):166-169.
2024-11-20
2024-11-20